Trouble Shooting
If your Servo Voltage Stabilizer does not operate properly, please check the following points before calling for service.
| Sr. No. | SYMPTOM | CAUSE | REMEDY |
|---|---|---|---|
| 1 | No Output | No Input Supply | Call Your Electrician |
| 2 | Incoming Voltage Is Out Of Range. Servo May Be In Cut-Off Mode | Use By-Pass mode | |
| 3 | MCB / Fuse May Be Shut-Off / Blown Due To Over Loading | Check Your Load | |
| 4 | High / Low Output Contact Our Service Voltages | Input Voltage Out Of Range | Contact Our Service Engineer |
| 5 | Problem In Control Circuit | Contact Our Service Engineer |
